
****************************************************************************
*                                                                          *
*                         The Ethernet Adapter                             *
*                                                                          *
*               NDIS Driver for Windows for Workgroups 3.11                *
*                                                                          *
*                               Ver. 3.02                                  *
*                                                                          *
*                              README file                                 **                                                                          *
****************************************************************************

1. Introduction:

   The Ethernet Adapter Windows for Workgroups 3.11 Driver conforms to 3Com/
   Microsoft Network Driver Interface Specification v3.0. It supports Micro-
   soft Windows for Workgroups v3.11 enviroment.


2. Contents of the Subdirectory:

      RETH.DOS        NDIS driver for DOS v2.02.

      RETH.386        NDIS driver for DOS v3.02.

      OEMSETUP.INF    A description file for installing the Ethernet NDIS
                      driver under Windows for Workgroups 3.11.


3. Installation

 * Take the following steps at the first time you setup Windows for Work-
   groups on your hard disk:

   1) Select 'Network Setup' from Network group in Windows Program Manager.

   2) When the "Network Setup" window appears, select 'Drivers...' botton.

   3) When the 'Network Drivers' windows shows, choose 'Add Adapter...' bot-
      ton.

   4) When the 'Add Network Adapter' window is displayed, select 'Unlisted
      or Updated Network Adapter'.

   5) When the 'Install Driver' window appears, insert the Distribution Disk-
      ette into drive A:, and then enter 'A:\WFW311' and select 'OK'.

   7) When the 'Unlisted or Updated Network Adapter' window is displayed,
      choose "E2k/E1k/PCMCIA Ethernet".

   8) After Windows for Workgroups has finished reading the driver, the
      'E2k/E1k/PCMCIA Ethernet' window will be re-displayed.

   9) In the 'Network Drivers' window, select the 'Close' button.

  10) After returning to the 'Network Setup' window , select 'Continue'.


 * If the Windows for Workgroups has been installed and you want to change
   the network adapter to E2k/E1k/PCMCIA Ethernet Adapter, follow the pro-
   cedure described below.

   1) Select 'Network Setup' from Network group in Windows Program Manager.

   2) In 'Network Setup' window, select 'Drivers...'.

   3) In 'Network Drivers' window, select 'Add Adapter...' botton.

   4) In the 'Add Network Adapter' window, select 'Adapters'.

   5) In the 'Network Adapters' window, select the 'Remove' button to cancel
      the previous settings.

   6) Select the 'Add' button.  When the 'Add Network Adapter' window is dis-
      played, choose 'Unlisted or Updated Network Adapter'.

   7) When the 'Install Driver' window appears, insert the Distribution Disk-
      ette into drive A:, and then enter 'A:\WFW311' and select 'OK'.

   8) When the 'Unlisted Or Updated Network Adapter' window is re-displayed,
      choose 'E2k/E1k/PCMCIA Ethernet'.

   9) After Windows for Workgroups has read the E2k/E1k/PCMCIA Ethernet driver
      completely, the 'E2k/E1k/PCMCIA Ethernet' window will be re-displayed.

  10) In the 'Network Adapters' window, select the 'Close' button.

  11) After returning to the 'Network Setup' window, select 'OK'.

